We have prepared the following guide to assist you with your electronic file preparation and submission. If you have a specific problem that is not covered in this guide, or have other questions, please feel free to contact us. Improperly prepared files can cause delays in manufacturing.
All fonts are included.
A 3mm border must be added to pictures and designs bleeding to the edge, so that there is no white space or border showing around the artwork. It is also important to keep text at least a 4-5mm away from the paper edge or the trim line to prevent accidental cropping.
Print previews are not a safe and sure measuring tool for colour accuracy. Colours on the file might be effected by monitor calibration, screen resolution and lighting, just to name a few. Many Pantone colours show a marked colour shift when converted to four colour process.
For one, two or three colour jobs printed in Pantone spot colour, make sure your colours are specified as spot colour and they separate correctly. You can test this by printing separations on your laser printer.
To achieve the desired colour on press, digital files must reflect accurate colour models and percentage. Please make sure all colors are in CMYK mode for colour accuracy and a better quality output.
The following outlines the specific file requirements by application. If you have any questions, please contact our graphics department.
We provide PDF files as electronic soft proofs. These digital proofs intend to show you the layout and design elements of your job, but cannot be a guarantee of colour accuracy. If colour accuracy is of extreme importance to you, please ask for a hard copy proof. Scan all transparencies and line art at 100% of final size unless data size is prohibitive. If such a case occurs, scan at 1/4 or 1/2 of final size. Scan all transparencies and line art at 100% of final size unless data size is prohibitive. If such a case occurs, scan at 1/4 or 1/2 of final size.